Glass Fibre Gas Cartridge Filters
When the highest flow and longest life gas cartridge is required
PurePore GF gas cartridge filter range combines established depth filter technology, with a pleated high surface area construction, and sterile filtration to 0.02 micron in gas. These sterile gas cartridges contain pleated borosilicate glass fibre media, surface modified with fluoropolymer to providing hydrophobic properties, allowing operation where small amounts of condensate are present.
Flow rates of PurePore GF Gas are typically 2-3 times that of PTFE membrane filters, such as SurePore PTFE Gas and this that dramatically reduces cartridge usage and/or installation size impacting running and capex costs.
Why Choose PoreFiltration?
-
Extensive product range
-
Best Price GUARANTEED!
-
Specialist support team with deep knowledge of liquid & gas applications
-
Reliable quality and delivery.
Technical details
-
Filter Medium: Surface modified borosilicate microfibre
-
Available lengths: 5.0" (AB05), 10.0", 20.0", 30.0"
-
Available micron rating: 0.02µm in gas (condensate free) - Absolute sterilising grade validated by aerosol and viral challenges
-
Sterilizable - Steam-in-place 140℃, Autoclave 121℃
-
Maximum differential pressure - Reverse 5.2 bar @ 25℃, 1.9 bar @ 82℃
- Quality control - 100% integrity tested; Cartridge fully traceable; All material comply with relevant CFR21 requirements: Bacteria Aersol Challenge Test TR≥1011 Full validation available upon request.
-
Available end caps - Wide bore code 7 with St.St insert option
- Available formats: Cartridge, Capsules and Junior
Applications
- Tank and vessel venting
- Fermentation inlet gas/ off-gas filtration
- Compressed air/ gas filtration
- Autoclave/ lyophiliser vacuum break
- Sterile filtration of gases used in filling and bottling equipment in the food and beverage sector.
Technical details [Product A]
| Filter Medium | Polypropylene |
| Available Lengths |
9.75" (24.8cm), 10.0" (25.4cm), 20.0" (50.8cm), 30.0" (76.2cm), 40.0" (101.6cm) |
| Available Micron Ratings |
0.5, 1,3, 5, 10, 20, 30, 50, 75, 100μm |
| Internal Diameter |
1.1" (28mm) / 4.5" (114mm) |
| External Diameter |
2.5" (63mm) |
| Max Operating Temperature | XX degrees |
| Maximum Differential Pressure |
60psid @ 70°F (4.1 Bar @ 30°C) 50psid @ 122°F (3.4 Bar @ 50°C) 30psid @ 158°F (2 Bar @ 70°C) 15psid @ 180°F (1 Bar @ 82°C) |
| Recommended Changeout Differential Pressure |
37psid (2.5 Bar) @ 30°C |
| Regulatory |
All filter bags are supplied free of Silicone. FDA Approved. EU XXX. |
| Datasheets |
Other Related Products
Gas Filter Housings
Gas cartridge filter housings for sterile compressed gas filtration in food, beverage, process water and healthcare applications.
Tank Vent Filter Housings
Vent cartridge filter housing allowing sterile venting of non-pressurised tanks and vessels in food, beverage, water and healthcare.
Heated Vent Filter Housings
Single cartridge vent housing suitable for use with tanks holding liquids at elevated temperatures, such as WFI or syrups.
Talk to us today about your filtration requirements
-
Extensive product range
-
Best Price GUARANTEED!
-
Specialist support team with deep knowledge of liquid & gas applications
-
Reliable quality & delivery